PL16DI - 16 Digital Input Module

The PL16DI module is a 16 channel digital input module. The inputs are isolated from the logic by bi-directional opto-couplers. The inputs are divided into 2 isolated groups of 8 inputs each. This allows for many configurations in which the input module may be used. One such configuration could be where one group is connected as common positive and the second group connected as common negative.

The counters operate in three modes.

In mode 0: All the counters are disabled.

In mode 1: The counters are 32 bit counters allowing a count value from 0 to 4294967295. The count value can be cleared by writing a zero to the associated registers or preset to any other value using the same method.

In mode 2: The inputs are connected as up/down counters. Input 1 will increment counter 1 whilst input 2 decrements counter1. In the same way, inputs 3&4 operate counter 2, inputs 5&6 operate counter 3 and inputs 7&8 operate counter 4,etc.

When the input filter is configured for > 10ms (Input Filter > 1), then the 16 counters are saved in non-volatile memory and the count value will be saved when the power fails.

PL16DI - 16 Digital Input Module

Digital Inputs

16

Digital Counters

16

Counter Resolution

32 Bit

Counter frequency

1 KHz (max)

Pulse width

500uSec (min)

Counter Mode

UP or UP/DOWN

Digital input 0 level

0 to +6.5Vdc

Digital input 1 level

+12Vdc to +24Vdc

Input Impedance

2200 ohms

Input filter

6553 msec. (max)

Isolation (Field & Logic)

1500 V RMS

Status Indication

LED per channel

Order Codes

  • PL16DI - 16 Digital Input Module

Want more information?

Fill in your details below to receive more information on the:

PL16DI - 16 Digital Input Module

  • Country
  • This field is for validation purposes and should be left unchanged.
Procon Electronics