PL8AI/V - 8 Voltage Input Module

The PL8AI/V is a 8 channel voltage input module. The inputs are isolated from the logic and share a common negative terminal.

The standard setting for the PL8AI/V module is 0 – 10V. An input voltage of 0 – 10Volts represents an output of 0 – 4095 and 2 volts would give a reading of 819 ± 1LSB.  To obtain an output value of 0 to 4095 for an input signal of 2 to 10V  the offset switch is switched on. An input range of 0(1) to 5Vdc is available by removing the jumper link located on the analogue board inside the enclosure.

PL8AI/V - 8 Voltage Input Module

Analog Inputs

8

Type

Single-Ended

Voltage

0-10Vdc / 0-5Vdc

Offset (switch selectable)

2Vdc (0-10) / 1Vdc (0-5)

Resolution

12 bit (0-4095)

Sample rate

12.5 samples/sec

Input Impedance

20KOhms

Drift

50 ppm/deg.C typ.

Accuracy

0.2 % of span

Isolation (Field & Logic)

1500VAC RMS

Power supply (Field)

+12Vdc to 24Vdc

Order Codes

  • PL8AI/V - 8 Voltage Input Module

Want more information?

Fill in your details below to receive more information on the:

PL8AI/V - 8 Voltage Input Module

  • Hidden
  • Country
  • This field is for validation purposes and should be left unchanged.
Procon Electronics