PT4RO - 4 Relay Output Module
The PT4RO module has 4 normally open/ normally closed relay outputs. These modules may be used when a higher drive capability is required, or when isolation between outputs are required.
Each output can be individually switched on or off, or all outputs can be set up at the same time by writing a single number to the output register which represents the status of all outputs.
An output watchdog timer can be configured to switch off all the outputs if there has been no communications with the module for up to 255 seconds. A value of 0 seconds will disable this timer and the outputs will remain in the last programmed state.
PT4RO - 4 Relay Output Module
Relay Outputs
4
Type
Relay – 1 x Form C
Max Load Current
0.5Aac / 1Adc.
Max load Voltage
220Vac / 28Vdc
Isolation (Field & Logic)
4000VAC RMS
Watch dog output timer
Disable or 1-255 sec adjustable
Status Indication
LED for each channel
Power supply (Logic)
+24Vdc
Order Codes
- PT4RO - PROMUX TCP 4 Relay Output Module
Want more information?
Fill in your details below to receive more information on the:
PT4RO - 4 Relay Output Module
