PC8AIIS - 8 Current Input Module
The PC8AIIS is an 8 channel current input module. The inputs are divided into 4 isolated circuits. The module uses differential inputs to reduce effects of electrical noise and mains pickup. This module is ideal for monitoring existing 4-20mA current loops which are isolated from each other and cannot be connected to a common point of reference.
The module plugs into a special bus connector which fits inside the DIN rail. The power supply voltage and the CAN bus signals are connected via this bus connector.
The CAN interface is electrically isolated and is compliant with ISO 11898.
The module has been equipped with status led’s which are used to indicate the status of the Inputs and communications. This visual indication assists with fault finding and diagnostics.
The CANopen node ID and bit rate can be setup by DIP switches or software.
Logic Supply Voltage
12 -24 Vdc
Logic Supply Current
86mA @ 12V / 45mA @ 24V
8 (isolated in pairs)
0 to +/-20 mA
Input update rate
12ms – 100ms (selectable)
1500Vrms between field and logic
Node Guarding / Consumer Heartbeat
DIP switch or software
Number of PDO
Event Controlled Asynchronous,
Event Timer Asynchronous,
Sync – Acyclic, Sync – Cyclic.
Number of SDO
-20°C to + 70°C
-40°C to + 85°C
Logic Power and Comms.
5 way connector that clips onto DIN rail
4 x 3 Way screw connector on top and bottom
- PC8AIIS - CANopen 8 Current Input Module
Want more information?
Fill in your details below to receive more information on the: