PC6DIO - 6 Digital Input / 6 Output Module

The PC6DIO module is a 6 channel digital input and 6 channel digital output module.

The inputs are isolated from the logic by opto-couplers and are designed to be switched to positive (common negative). The inputs have internal counters associated with them. These counters are 32 bit counters allowing a count value from 0 to 4294967295.

The 6 digital outputs are open drain MOSFET (N-TYPE). The outputs may be used to drive lamps or external relays when more drive capability is required. The outputs are isolated from the logic and they share a common negative terminal.

The module plugs into a special bus connector which fits inside the DIN rail. The power supply voltage and the CAN bus signals are connected via this bus connector.

The CAN interface is electrically isolated and is compliant with ISO 11898.

The module has been equipped with status led’s which are used to indicate the status of the Inputs and communications. This visual indication assists with fault finding and diagnostics.

The CANopen node ID and bit rate can be setup by DIP switches or software.

Power Supply

Logic Supply Voltage

12 -24 Vdc

Logic Supply Current

37mA @ 12V / 21mA @ 24V

Field Supply Voltage

12 -24 Vdc

Field Supply Current

6mA @ 12V / 6mA @ 24V

Digital Inputs

Input Points

6

Input Voltage Range

12 – 24 Vdc

Input Current per input

2mA @ 12Vdc / 4mA @ 24Vdc

Isolation

1500Vrms between field and logic

Typical ON/OFF Delay

< 1ms with filter disabled

Counters

Inputs

1 to 6

Resolution

32 Bits

Frequency

5KHz (max)

Pulse Width

100us (min)

Digital Outputs

Output Points

6

Maximum Voltage

48 Vdc

Maximum Current

0.5A per output

On-state resistance

0.55 ohms

Output update rate

< 1ms

Isolation

1500Vrms between field and logic

NMT

Slave

Error Control

Node Guarding / Consumer Heartbeat

Node ID

DIP switch or software

CANopen Data

Number of PDO

1Rx 4Tx

PDO Modes

Event Controlled Asynchronous,
Event Timer Asynchronous,
Sync – Acyclic, Sync – Cyclic.

PDO Mapping

Variable

PDO Linking

Supported

Number of SDO

1 Server

Error Message

Yes

Temperature

Operating Temperature.

-20°C to + 70°C

Storage Temperature

-40°C to + 85°C

Connectors

Logic Power and Comms.

5 way connector that clips onto DIN rail

Inputs

6 x 3 Way screw connector on top and bottom

Note:
Inputs 1 to 6 are used as both digital inputs and counter inputs.

Order Codes

  • PC6DIO - 6 Digital Input / 6 Output Module

Want more information?

Fill in your details below to receive more information on the:

PC6DIO - 6 Digital Input / 6 Output Module

  • Country
  • This field is for validation purposes and should be left unchanged.
Procon Electronics