PB6RO - 6 Relay Output Module

The PB6RO module has 6 normally open/ normally closed relay outputs. These modules may be used when a higher drive capability is required, or when isolation between outputs are required.

The outputs are written to by the Modbus master device such as a PC or PLC. Each output can be individually switched on or off, or all outputs can be set up at the same time by writing a single number to the output register which represents the status of all outputs.

An output watchdog timer can be configured to switch off all the outputs if there has been no communications with the module for up to 255 seconds. A value of 0 seconds will disable this timer and the outputs will remain in the last programmed state.

PB6RO - 6 Relay Output Module

Digital Outputs

6

Type

Relay – 1 x Form C

Max Load Current

1A @ 220VAC / 1A @ 28VDC

Isolation (Field & Logic)

4000VAC RMS

Watch dog output timer

Disable or 1-255 sec adjustable

Status Indication

LED for each channel

Power supply (Logic)

+24Vdc

Order Codes

  • PB6RO - Modbus RS485 6 Relay Output Module

Want more information?

Fill in your details below to receive more information on the:

PB6RO - 6 Relay Output Module

  • Country
  • This field is for validation purposes and should be left unchanged.
Procon Electronics