PB6AIIS - 6 Current Input Module Fully Isolated

The PB6AIIS is a six channel 16 bit 0(4)-20mA input module. The inputs are fully isolated from input to logic and between inputs. This module is ideal for monitoring existing 4-20mA current loops which are isolated from each other and cannot be connected to a common point of reference.

The standard setting for the PB6AIIS module is 0 – 20mA input current which represents an output value of 0 – 4095 (12 bits) in the corresponding Modbus register. To obtain an output value of 0 to 4095 for an input signal of 4 to 20mA the input type must be programmed into the Modbus registers. This module can also be configured for a 0 – 20.000mA input range or +/- 20.000mA input. The module also supports 16 bit ranges.

PB6AIIS - 6 Current Input Module Fully Isolated

Analog Inputs

6

Type

Differential

Current

0-20mAdc

Resolution

16 bit

Sample rate

No. of inputs enabled X 180ms

Input Impedance

22 Ohms

Isolation (Inter Channel)

350VAC (Pk-Pk)

Drift

100 ppm/deg.C typ.

Accuracy

0.2 % of span

Isolation (Field & Logic)

1500VAC RMS

Order Codes

  • PB6AIIS - Modbus RS485 6 Current Input Module Isolated

Want more information?

Fill in your details below to receive more information on the:

PB6AIIS - 6 Current Input Module Fully Isolated

  • Country
  • This field is for validation purposes and should be left unchanged.
Procon Electronics